D-Bus overview – Fedora Magazine

What D-Bus is

D-Bus serves various purposes aiming to facilitate the cooperation between different processes in the system. This article will describe D-Bus and how it performs this function.

From the D-Bus creators definition:

Reaching the desired application

We talk about a D-Bus system but in a system there can be more than one bus. Actually, normally, there are at least 2:

• A system bus: applications that manage system-wide resources that are connected to it.
• One session bus per logged in user: desktop applications commonly use this bus.

To send D-Bus messages to the desired destination on a bus, a way to identify each of the applications connected to a bus is needed. For that reason, each application gets at least one bus name that others can specify as the destination of its messages. There are two name types:

• Unique connection names: Each application that connects to the bus automatically gets one. It’s a unique identifier that will never be reused for a different application. These names start with a colon (‘:’) and normally look something like “:1.94” (the characters after the colon have no special meaning but are unique).
• Well-known names: While unique connection names are dynamically assigned, applications that need to be easily discoverable by others must own a fixed name that is well known to them. They look like reversed domain names, similar to “org.freedesktop.NetworkManager”.

You can see what applications are connected to the two main buses using the busctl commands below. We’ll discover that nowadays many of the main components of the system use D-Bus. In the following examples, omit the –acquired option to also see unique connection names.

$ busctl list --system --acquired
...
$ busctl list --user --acquired
...

In an analogy with IP networks, unique connection names are like dynamic IP addresses and well-known names are like hostnames or domain names.

For example, NetworkManager is a daemon that controls the networking configuration of the system. Clients like GNOME control center, or the command line tools nmcli and nmstate, connect to the system bus and send D-Bus messages to the “org.freedesktop.NetworkManager” well-known name to get info or request changes.

Note: the D-Bus specification uses the term “bus name”, so it’s somehow official. This can be quite confusing because people tend to think that it refers to different buses, instead of apps connected to the same bus. Many articles and tools use the term “service” instead of “bus name” because it’s more intuitive, but it has a different meaning in the spec so it’s discouraged. In this article I use the term “destination” whenever possible. In any case, remember that “bus name” refers to “name IN the bus”, and not “name OF a bus”.

D-Bus objects

D-Bus applications can expose some of their resources and actions in what we could call a D-Bus API.

The exposed resources resemble the main concepts of object oriented programming languages so they are called D-Bus objects. Specifically, each application can expose an indefinite number of objects with properties and methods. Individual D-Bus objects are identified by their D-Bus object paths, which look much like Unix paths (i.e. /path/to/the/object). 

You can inspect what objects a certain application exposes using the busctl command. For example:

$ busctl tree org.freedesktop.NetworkManager

Applications can express the hierarchy between objects, thanks to this path-like identifier, in an intuitive way. It is easy to know that “/Background/Color” is an object that hierarchically belongs to the object “/Background”. The spec does not mandate following this hierarchical design but almost all applications do it.

Note: it is common in many applications that the object paths begin with the reverse domain of the author (i.e. /org/freedesktop/NetworkManager/*). This avoids name collisions with other objects from different libraries or sources. However, this is not mandatory and not all applications do it.

D-Bus interfaces, methods and properties

Each D-Bus object implements one or more D-Bus interfaces and each interface defines some properties and methods. Properties are like variables and methods are like functions. The names of D-Bus interfaces look like “org.example.AppName.InterfaceName”.

If you already know any programming language that uses the concept of interface, like Java, this will be familiar to you. If you are not, just remember that interfaces are like types for the objects and each object can have more than one type at the same time. But keep in mind that, unlike what happens in many of these languages, D-Bus objects never define direct members, only the interfaces do.

Example:

• A printing server application defines the following interfaces:
  • Printer: defines the method “PrintDocument” and the property “InkLevel”.
  • Scanner: defines the method “ScanDocument”.
• The object “/Devices/1” represents a normal printer, so it only implements the interface “Printer”.
• The object “/Devices/2” represents a printer with scanner, so it implements both interfaces.

Introspection

Introspection allows you to get a list of the interfaces, with its methods and properties, that a D-Bus object implements. For example, the busctl command is used as follows:

$ busctl introspect org.freedesktop.NetworkManager /org/freedesktop/NetworkManager

Methods and Properties

Now let’s see how to call to D-Bus methods and read properties from the terminal in two examples:

# Method call
busctl call
    --system
    org.freedesktop.NetworkManager           `# app name`
    /org/freedesktop/NetworkManager/Settings `# object`
    org.freedesktop.NetworkManager.Settings  `# interface`
    ListConnections                          `# method`

# Property read
busctl get-property
    --system
    org.freedesktop.NetworkManager              `# app name`
    /org/freedesktop/NetworkManager/Devices/2   `# object`
    org.freedesktop.NetworkManager.Device.Wired `# interface`
    PermHwAddress                               `# property`

To read or write properties, we actually have to call methods of the standard interface “org.freedesktop.DBus.Properties” defined by the D-Bus specs. Busctl, however, does it under the hood with the get/set-property command to abstract a bit from that. Exercise suggestion: read a property using busctl call (hint: you need to specify the arguments’ signature, which is “ss”).

Note: when calling D-Bus methods, it’s not mandatory to specify the interface, but if two interfaces define the same method name, the result is undefined, so you should always specify it. The tool busctl makes it mandatory for this reason.

D-Bus type system

D-Bus uses a strict type system, so all properties, arguments and return values must have a well defined type.

There are some basic types like BYTE, BOOLEAN, INT32, UINT32, DOUBLE, STRING or OBJECT_PATH. These basic types can be grouped into 3 different types of containers: STRUCT, ARRAY and DICT_ENTRY (dictionaries). Containers can be nested within other containers of the same or different type.

There is also a VARIANT type which allows some kind of dynamic typing.

Each type can be identified by a signature string. The signatures of basic types are single characters like “i”, “u”, “s”, etc. Signatures of compound types are strings like “(iibs)”, “ai” or “a{s(ii)}”. A complete description of all types and signatures is beyond the scope of this article, but depending on the language and/or D-Bus library that you use you will need at least some knowledge on how to specify the type of the values you pass or receives. Check the D-Bus specification for more info.

Putting it all together (python example)

Now that we know the basic concepts of D-Bus, we are ready to send D-Bus messages. Let’s see a complete Python example.

#!/usr/bin/env python3

# Import the 'dbus' module from dbus-python package.
# The package can be installed with `pip install dbus-python`.
# Documenation: https://dbus.freedesktop.org/doc/dbus-python/
import dbus

# We need the NetworkManager's D-Bus API documentation to
# know what objects and methods we are interested in:
# https://networkmanager.dev/docs/api/latest/spec.html

# We'll connect to system bus
bus = dbus.SystemBus()

# We'll send our messages to NetworkManager
NM_WELL_KNOWN_NAME = "org.freedesktop.NetworkManager"

# Call to the following method:
#  - object: /org/freedesktop/NetworkManager
#  - interface: org.freedesktop.NetworkManager
#  - method: GetDeviceByIpIface
#  - input argument: "eth0" (type: STRING)
#  - return value: the device's path (type: OBJECT_PATH)
#
# Get the path to the object that represents the device with
# the interface name "eth0".
nm_dbus_obj = bus.get_object(
    NM_WELL_KNOWN_NAME, "/org/freedesktop/NetworkManager"
)
nm_dbus_iface = dbus.Interface(
    nm_dbus_obj, "org.freedesktop.NetworkManager"
)
try:
    device_dbus_path = nm_dbus_iface.GetDeviceByIpIface("eth0")
except dbus.exceptions.DBusException as e:
    print("D-Bus error: " + str(e))
    quit()

print("D-Bus path to eth0 device: " + str(device_dbus_path))

# Call to the following method:
#  - object: the device that we obtained in the previous step
#  - interface: org.freedesktop.NetworkManager.Device
#  - method: Disconnect
#
# Request to the NM daemon to disconnect the device
# Note: NM will return an error if it was already disconnected
device_dbus_obj = bus.get_object(
    NM_WELL_KNOWN_NAME, device_dbus_path
)
device_dbus_iface = dbus.Interface(
    device_dbus_obj, "org.freedesktop.NetworkManager.Device"
)
try:
    device_dbus_iface.Disconnect()
except dbus.exceptions.DBusException as e:
    print("D-Bus error: " + str(e))
    quit()

print("Device disconnected")

Note that we didn’t need to specify the type of the method’s argument. This is because dbus-python does its best to convert the Python values to the equivalent D-Bus values (i.e. str to STRING, list to ARRAY, dict to DICT_ENTRYs, etc.). However, as D-Bus has a strict type system, you will need to specify the type when there is ambiguity. For example, for integer types you will often need to use dbus.UInt16(value), dbus.Int64(value), etc.

More D-Bus features

Another important and widely used D-Bus feature are signal messages. Applications can subscribe to other applications’ signals, specifying which of them they are interested in. The producer application sends signal messages when certain events happen, and the subscriber receives them in an asynchronous way. This avoids the need for polling all the time.

There are many other useful features in D-Bus like services activation, authentication, introspection, etc, which are far beyond the scope of this article.

Useful tools

For command line, systemd’s busctl is the most intuitive and complete tool, with great features like monitoring or capturing D-Bus traffic as a pcap file. However, value types have to be specified as D-Bus signatures, which is hard if you don’t know them very well. In that case, dbus-send from the dbus-tools package or Qt’s qdbus might be easier to use.

When starting to play around with D-Bus, exploring the different application’s objects hierarchy is much easier with a GUI tool like the Qt DBUS Viewer (QDbusViewer).

Consulted articles