In the first part of this two?part series of blog posts about NGINX Plus and the Internet of Things (IoT), we showed how NGINX Plus – as a fully featured application delivery controller (ADC) with support for TCP and UDP applications – increases the availability and reliability of IoT applications. In this second post, we discuss two ways to use NGINX Plus to improve IoT security. The two posts cover the following use cases:
Offloading TLS Termination from MQTT Servers
In the example use cases in the first post, all of the MQTT traffic is plaintext and unencrypted. To improve IoT security, it is best practice to use TLS to encrypt the MQTT data passing between clients and upstream servers, whenever TLS encryption is supported by the IoT devices or IoT gateway. Encryption is an effective way to protect data in motion as it crosses public networks, but in production environments with millions of devices it can put an enormous load on the MQTT servers.
As shown in Figure 1, NGINX Plus can offload the CPU?intensive workload associated with TLS encryption from your MQTT servers (commonly called SSL offloading). This separation of concerns allows for the load?balancing tier and MQTT data?processing tier to scale independently and requires only a simple modification to our MQTT test environment.
(As in the first post, we use the Mosquitto command line tool as the client and HiveMQ instances running inside Docker containers as the MQTT brokers. For installation instructions, see Creating the Test Environment in the first post.)
After furnishing the NGINX Plus instance with a TLS certificate key?pair, we can use directives from the Stream SSL module to enable TLS termination.
This server block is identical to the configuration for session persistence in the previous post, except that line 2 specifies the standard port number for secure MQTT traffic, 8883, and lines 6–11 are added to configure the server to terminate TLS connections from clients. Explaining how to obtain and install a certificate is beyond the scope of this post; a production IoT deployment generally uses its own public key infrastructure (PKI). We also won’t go over the TLS?related directives. For more information about TLS termination, see the NGINX Plus Admin Guide.
With this configuration in place we can use the Mosquitto MQTT client to publish an encrypted message. Notice that we specify the secure MQTT port (8883) and a file containing the public key of the certificate authority that issued the server certificate on our NGINX instance (cafile.pem).
$ mosquitto_pub -d -h mqtt.example.com -t "topic/test" -m "test123" -i "thing001" -p 8883 --cafile cafile.pem Client thing001 sending CONNECT Client thing001 received CONNACK Client thing001 sending PUBLISH (d0, q0, r0, m1, 'topic/test', ... (7 bytes)) Client thing001 sending DISCONNECT $ tail --lines=1 /var/log/nginx/mqtt_access.log 192.168.91.1 [23/Feb/2017:11:41:56 +0000] TCP 200 23 4 127.0.0.1:18832 thing001
Using Client Certificates to Authenticate MQTT Clients
The post has been updated to use the refactored session (
Despite the success and widespread adoption of MQTT for IoT use cases, the protocol itself has very limited provision for verifying the identity of clients. Authentication is supported through the use of a username and password field in the MQTT
CONNECT packet but in reality this is difficult to manage.
Although not officially supported by the MQTT specification, X.509 client certificates are commonly used to authenticate clients and are especially useful when combined with TLS encryption so that mutual authentication can take place:
- The client verifies the identity of the server
- The server verifies the identity of the client
NGINX Plus can combine TLS termination with client certificate authentication so that MQTT clients must provide a certificate, and that the common name (CN) of the certificate matches the MQTT ClientId. By linking the ClientId to the CN of the X.509 certificate, the MQTT server can be sure that messages received are from a trusted and genuine device.
NGINX Plus Configuration for MQTT Client Authentication
server block enables authentication of client certificates.
on directive tells NGINX that clients must present certificates. In this example, client certificates are issued by an intermediate certificate authority and so we use the ssl_verify_depth directive to tell NGINX that there are two levels of issuer certificates to verify. The ssl_client_certificate directive specifies the location on disk of the public certificates for the certificate authorities (CAs) that issue certificates to clients; NGINX uses public CA certificates as part of the client authentication process.
CONNECT packet has the same value as the CN in the certificate issued to that same client.
We add the
parseCSKVpairs function to extract the CN value from the X.509 certificate. It is called by another function (the
getClientId function), and so must appear above it in the file.
The variable declarations and
getClientId function on lines 14–45 are the same as lines 1–32 of the mqtt.js file we created for the session persistence use case.
s.variables object. This variable contains numerous attributes as a comma?separated list of key?value pairs.
The final lines (53–64) are the same as lines 34–45 in the mqtt.js file for the session persistence use case.
Testing MQTT Client Authentication
With this configuration in place we can send an authenticated and encrypted message to our test environment using the Mosquitto client. We can examine the certificate key?pair that has been issued to thing001 by running this openssl x509(1) command.
$ openssl x509 -subject -noout thing0001.crt subject= /C=GB/L=Cambridge/O=example.com/OU=Example CA/CN=thing001
We can now supply this certificate key?pair to our test environment.
$ mosquitto_pub -d -h mqtt.example.com -t "topic/test" -m "test123" -i "thing001" -p 8883 --cafile cafile.pem --cert thing0001.crt --key thing0001.key Client thing001 sending CONNECT Client thing001 received CONNACK Client thing001 sending PUBLISH (d0, q0, r0, m1, 'topic/test', ... (7 bytes)) Client thing001 sending DISCONNECT $ tail --lines=1 /var/log/nginx/mqtt_access.log 192.168.91.1 [24/Feb/2017:14:37:08 +0000] TCP 200 23 4 127.0.0.1:18832 thing001
If a client trying to establish a connection provides a ClientId that is mismatched with our certificate, or fails to provide a certificate at all, NGINX Plus terminates the connection immediately, so that unauthenticated messages never reach the upstream MQTT servers. Thus NGINX Plus provides additional protection to the MQTT servers from malicious or erroneous clients.
$ mosquitto_pub -d -h mqtt.example.com -t "topic/test" -m "test123" -i "BADTHING" -p 8883 --cafile cafile.pem --cert thing0001.crt --key thing0001.key Client BADTHING sending CONNECT Error: The connection was lost. $ mosquitto_pub -d -h mqtt.example.com -t "topic/test" -m "test123" -i "NOCERT" -p 8883 --cafile cafile.pem Client NOCERT sending CONNECT Error: The connection was lost. $ tail --lines=2 /var/log/nginx/mqtt_access.log 192.168.91.1 [24/Feb/2017:14:37:16 +0000] TCP 500 0 0 - BADTHING 192.168.91.1 [24/Feb/2017:14:42:16 +0000] TCP 500 0 0 - -